IPTable network filters
IDE, SCSI and CF (Disk on a Chip) drive support.
Quad Network support:
GREEN — Internal Trusted Network
BLUE — Wireless Semi-Trusted Network (can be used as a second Green)
ORANGE — DMZ for Internet accessed servers
RED — The Internet connected via:
USB Connected (w/ right driver):
Multiple “Real” IP supported on RED when using a Static IP base.
DHCP client support on RED to receive IP from ISP, also support for a dynamic DNS to be updated as this IP changes.
DHCP server for GREEN and BLUE to simplify network setup and maintenance.
NTP server and client for setting IPCop clock and supplying a common clock for internal GREEN and BLUE networks.
Intrusion Detection for ALL networks (RED, ORANGE, BLUE and GREEN)
Virtual Private Network (VPN) to allow multiple sites to act as single large network.
Proxy Support for both Web Surfing and DNS support allow for “faster” connection response on and simplified network setup.
Administration after initial load is via a secure Web Interface including:
Performance Graphics for CPU, Memory and Disk as well as Network throughput
Log viewing with autorotation.
Multiple language support.
Use of older equipment. 386 or better. Version 1.4 has been tested on 486sx25 with 12M of RAM and 273M of hard drive. This was the oldest and smallest we could find at the time of test. It was loaded via the Net Install option and supported a full Cable Modem download speed of 3Mb/s.