3.1.7. Restore settings

At this point, you have the option of restoring files backed up from an IPCop, either from a floppy disk, or a USB stick. You can skip this section on a new installation, or when upgrading onto a different hardware platform.

If you have a backup of an IPCop system configuration, insert the media, select the type from the menu on screen, and press the Ok button. If not, select Skip instead.

Restore settings

If you restore from floppy, you will not have to respond to any further dialogs. After the old configuration is restored, the install process will skip to the Disk installation complete dialog, next.

Restore from IPCop 1.4.21 or older

IPCop 2.0.0 will only accept backups from IPCop 1.9.9 or higher.